XIP-3901-UDC-IF
Dual-channel 4K UHD or Quad-channel HD SDI-IP Hybrid Format Converter with HDR and Audio Processing Application for the XIP-3911 and XIP-3901
The XIP-3901-UDC-IF application has two operating modes — SDI only or SDI and IP (hybrid) — for deployment flexibility and to provide a bridge to an all IP workflow. The XIP-3901-UDC-IF has optional HDR and audio processors and, in addition, allows the application to be configured as a dual-channel 4K UHD or quad-channel HD broadcast-quality format converter.
The optional HDR processor, XIP-3901-UDC-HDR, allows conversion between SDR and HDR formats and wide color gamut BT.709 and BT.2020, supporting HLG (ITU-R BT.2100), PQ (ITU-R BT.2100), and S-Log3/S-Gamut3 formats.
FEATURES
- Independent dual-channel 4K UHD or quad-channel HD broadcast-quality up/down/cross video processor
- 12G 2160p, 3G 1080p and HD 1080i/720p SDI inputs and outputs
- Integrated frame synchronizer with additional video delay programmable to 6 frames
- Audio/video deglitcher to handle video hot switch at the input
- Video proc including: gain, offset, hue, horizontal and vertical picture enhancement during downconversion, RGB color corrector and gamut legalization
- PTP, external reference or dual URS frame reference supported
- Embedded audio and metadata delay and synchronization
- IP output available on dual 25 GigE IP media network interfaces:
- SMPTE ST 2110-20/21 video outputs with associated SMPTE ST 2110-40 metadata streams
- Four SMPTE ST 2110-30/31 Level A, B, C audio stream outputs per processing channel
- SMPTE ST 2022-7 for seamless protection of IP streams
- JT-NM TR-1001-1 compliant including NMOS IS-04/IS-05
- SMPTE ST 2059-1/-2 PTP with BMCA
- Media interfaces supports AOC cable, Short and Long Reach fiber
- Both FEC74 (CL74 Fire Code) and FEC108 (Reed Solomon IEEE) Forward Error Correction are supported
- XIP-3901-UDC-HDR option provides HDR conversion supporting both Wide Color Gamut BT.709/ BT.2020 and High Dynamic Range: HLG, PQ and S-Log3:
- Agile HDR conversion based on input signal colorimetry
- Supports 33-point Tetrahedral 3D LUT interpolation with choice among Grass Valley conversion algorithms, built-in BBC LUTs v1.5 NBCU LUTs, or user-defined custom LUTs compliant to Adobe cube file v1.0
- All processing operates in full 10-bit video signals with ability to pass sub-blacks and super-whites in SMPTE narrow video
- ITU R BT 2111 HLG/PQ color bar test patterns
- XIP-3901-UDC-AUD option adds four SMPTE ST 2110-30/31 audio input streams per processing channel, and provides 256 channel audio processors with level, delay, 2:1 mixer/shuffling, up-mixing and down-mixing 5.1.4 or 5.1 surround sound signal to a stereo channel pair
- GV Orbit for configuration, control and monitoring
- Individual XIP-3911 and XIP-3901 applications licensed, purchased as needed
- Rapid switching between XIP-3911 applications
- The XIP-3901-UDC-IF is also supported by the ATP-2000 Touch Panel with GV Orbit Dynamic Orchestration where all video processing parameters of both paths can be controlled from a touch panel interface
SPECIFICATIONS
SDI (Inputs/Outputs
Physical: 10 used HD-BNC connectors: 2 in, 8 out
SDI standard:
- SMPTE ST 292 (1.485, 1.485/1.001 Gb/s)
- SMPTE ST 424 (2.970, 2.970/1.001 Gb/s)
- SMPTE ST 2082-1:2015 (in 1 & 5, out 1 & 5)
Supported input/output formats:
- HD: SMPTE ST 274: 1080i59.94, 1080i50
- HD: SMPTE ST 296: 720p59.94, 720p50
- 3G: SMPTE ST 425 level A (mapping 1): 1080p59.94, 1080p50
- 12G: SMPTE ST 2082-10: 2160p59.94, 2160p50
Cable length (Belden 1694A):
- HD: 250m (820 ft.) at 1.485 Gb/s
- 3G: 150m (492 ft.) at 2.970 Gb/s
- 12G: 55m (180 ft.) at 11.88 Gb/s
Jitter:
- HD/SD: <0.2 UI (alignment jitter)
- 3G: <0.3 UI (alignment jitter)
- 12G: <0.3 UI (alignment jitter)
Reference Input
Physical: SMPTE ST 170/SMPTE ST 318/ITU 624-4 blackburst
Ethernet Port for Media
Physical: Two SFP28 sockets for active optical cable, short- and long-reach fiber
Standard: IEEE 802.3-2008 25 GbE
Performance: Up to 25 Gb of streaming per direction
Ethernet Port for Control
Physical: One electrical RJ45 port
Standard: IEEE 802.3 1000 Mb/s
Video Processing Performance
Signal path: 10 bits minimum
Electrical
Power: 60W maximum
MEDIA GALLERY
ORDERING INFORMATION
Application Software
XIP-3901-UDC-IF
Application Options
XIP-3901-UDC-HDR
HDR processing option
XIP-3901-UDC-AUD
Audio processing, down/up mix, shuffling option
Densité 3+ Frame
XIP-3911
Agile SDI/IP processing platform
XIP-3911-3+DRP-H
Double rear panel for Densité 3+ with HD-BNC
SFP+ Options
One or two SFP+ are needed to run this application with SMPTE ST 2110 IP streams
SFP-25G-SR
SFP28 25GBASE optical transceiver MMF
SFP-25G-LR
SFP28 25GBASE optical transceiver SMF
Remote Control
GV Orbit version 1.2, iControl or iControl Solo (version 7.50 or higher required)
